Maybe try moving/inverting the servo leads around on the rx, see if its maybe in the wrong channel. Other obvious one, made sure the battery is charged?
Printable View
Maybe try moving/inverting the servo leads around on the rx, see if its maybe in the wrong channel. Other obvious one, made sure the battery is charged?
I agree with Will, i think the servo leads are plugged in the wrong way up.
But then i don't think the bec wouldn't be powering the receiver so the receiver light wouldn't be onQuote:
Originally Posted by blazerbotics
The receiver can still get power, I accidentally had a plugin upside down a while back and it still lit up.Quote:
Originally Posted by Max
That is correct even upside down the RX would get power. the plus wire is in the middle and signal will act as a minus while testing for signal.
I've just checked and it sure is backwards. It says on the RX which way round to put them in so always check that.
This is the reason forums are great! wires swapped around.....motors working :)
Thanks Guys