Front means front of the robot.
Printable View
Front means front of the robot.
what shape does All Torque have?
A long box, with a wedge on either side. Non-invertible.
Ground Clearance: 0mm at front and back. 5mm at sides.
You said you use the TWM 3R, but those are just the gearboxes, what Magmotors do you have attached to them?
LEM-130.
...those...arent..Magmotors...grr...
S28-400 Magmotors.
In that case, I would not pick the TWM3R, because youe tracked robot would go a whopping 78,5km/hour, or 50mph!
Use the TWM3 instead, that gives you a 7.14:1 ratio. and 2 motors is plenty, no need to shove in 4, that is just way overkill and weight (26kg instead of 12.8kg).
I am keeping the TWM3R, but I am removing 2 of them.
Although, if I didnt, I would have the fastest ever track robot.
(Message edited by corsair_lightning on March 31, 2008)
Yes, but it would be next to impossible to turn it at any speed.
If there is a sprint competition, I will use the 4 TWM3Rs.
you would only be driving in a straight line or turn on the spot, and eat amps in any attempt to turn. Aiming to line up is right out the door, your robot would be worse to drive than InTriVerter.
Fu-Ma Ninjabot
Shape: Hazard with skirts on the sides and back.
Weight: 100kg (Wheeled)
Colour: Red
Dimensions: 100cm x 78cm x 17cm
Speed: 25mph
Turning Circle: 0mm
Ground Clearance: 0mm all around, but 5mm at sides and back if there are no skirts.
Movement: 2 Vulkalon wheels at the back.
Armour: 6mm titanium
Power: 2 TWM3R Team Whyachi gearboxes connected to 2 S28-400 Magmotors, powered by 7 NiCad packs.
Weapon: A 3m titanium sharpened blade powered by a Tornado Mer weapon gearbox. It spins at 5000rpm.
Srimech: none, since the weapon is long and low so no robot can get under without suffering major damage.
Notes: Updated bot from Team ZlayerZ RPG: Identity Theft.
OK, we KNOW youre incapable of coming up with a sensible robot design. So now youve resorted to stealing OTHER peoples designs?
YOU STAY AWAY FROM ORKA AND DIE-CERATOPS!
Seriously, youre not trying.
Kody never finished full stats for this bot, so I finished it for him.
I would never take the stats of those 2 bots.
Im serious.
this is an RPG-robot, they dont need full stats, neither do house robots IMO
still, its KODYS RPG-bot!
Why did you decide to improve other peoples designs without asking their permission?
Its got to the point where Im running out of patience here, weve tried to help you and you dont seem to be taking any of our advice.
sorry a 3 meter spinning bar? are u taking the mick?
a) 3 meter is too big, its outside the size limits for robot wars and FRA
b) that will never get upto speed
what about a 2 meter blade?
Out of interest, why exactly are there size limits on robots?
I can understand it on RW where the arena doors are only so wide, but it does seem a bit redundant...besides, I was thinking of building a 3-metre thwackbot if I ever got the chance :P
Maybe its because people are too lazy to build bigger doors. :proud:
It prob has something to do with fitting in the pit or fitting on the tables or something
Its not just the doors, but you have to realize roboteers have to carry these things into and out of the arena, the robots dont drive their by themselves. It is also a matter of practicality.
We keep it between 2m x 1,5m, which is already huge. I think at the moment The Saint comes closest to that.
For a start, give Kodys robot BACK to him and TRY again. Come up with your own sensible design, and well get back to you. The key words here are OWN and SENSIBLE.
Im becoming a bit dissappointed by you Mark. True, when I arrived I mucked up a bit - but NOTHING on your scale. If youre starting a tornument on this forum, dont pick others peoples robots just because you like it - withdraw Nitro-Gene from your competition, and dont put ANY more robots in.
DONT copy other peoples designs - use some ideas, but dont copy their desgins to the letter, as thats just lazy, and if you cant build your own robots, dont go and improve other peoples designs when you cant.
This may be a bit Paul Cuomo-esque, but...
+2>STOP STEALING OUR VAPOURBOTS
Im not helping you. Ive offered, but apparently youre not listening. I have totally lost it now. Lets see how you fare without our help, or anyones at all.
(Message edited by kodster on April 01, 2008)
New Bot:
Ninjoid
Shape: Tornado Mer
Weight: 100kg
Colour: Red on the top, with black on the sides.
Dimensions: 90cm x 90cm x 20cm
Speed: 20mph
Turning Circle: 0mm
Ground Clearance: 5mm all around
Movement: 2 Vulkalon wheels inside the robot.
Armour: 5mm Titanium
Power: 2 NPC-T64 motors powered by 6x NiCad Battlepacks
Weapon: A 2 meter blade powered by a 4-Magmotor Gearbox.
Srimech: The blade, and possibly doing a Mauler-like dance.
Notes: Its all about the blade, dude!
(Message edited by corsair_lightning on April 02, 2008)
A 2 meter blade is much too long.
what about a 1.5 meter blade?
Even that is asking a bit much. Id go with something that has reach, but wont spin your own robot in the process, like 1.3 metres. That has 20cm of reach for you to work with.
I know I said I wouldnt help, but I couldnt resist when I saw those stats. XD
(Message edited by kodster on April 02, 2008)
A Kj count would help for the blade, that usually gives us a better idea about what it can do.
Now it is a 1.3 metre 40kj blade.
You just randomly guess that kJ, didnt you?
Go to http://www.teamcosmos.com/ke/ke.shtmlhttp://www.teamcosmos.com/ke/ke.shtml (using some web browser other than Firefox) and calculate it there, then come and post it here.
3000rpm blade
The calculator doesnt work.
Thats because youre not using the correct web browser. If you have Internet Explorer, use it. If not...too bad. :P
I do use internet explorer.
Well then it should work. What problem are you having?
You might have popups turned off.