Wtf!!! Kill it!
Printable View
Wtf!!! Kill it!
Not sure about 1970's but it looks like it could be the internals to one of those animated dancing Santa props or such.
If anyone is desperate
https://www.ebay.co.uk/ulk/itm/182081490917
Bosch 1HP 750W GPA 24V DC motor 7.25" loco
Good lord!!!!!!
http://m.ebay.co.uk/itm/Robot-Wars-s...091?nav=SEARCH
My offer of £5.57 was declined :(
Could build a nice heavyweight with that cash instead.
Titanium Plate on Ebay
Seems like a sizable lump of grade 5 for only £40! 18mm would make a rather nice disk for a feather. I believe the same seller also has a longer thinner bar type of the same thickness.
I thought someone may be interested in these wheels and motors, they are pick up only
and a long way from me otherwise I would be interested-wheels look pretty chunky-
they look like they need lots of :? TLC http://www.ebay.co.uk/itm/Aldersley-...EAAOSwlXhZYKVd
Another Item caught my eye on Ebay, a ready made tracked chassis for a heavyweight
for £200 its got to be a bargain.
http://www.ebay.co.uk/itm/robot-bomb...ect-/112594233
Iisting removed but is it this one
https://m.ebay.co.uk/itm/robot-bomb-...%257Ciid%253A1
If so i went and Looked at that and trust me its not worth no more than £50
All wheels siezed and a POS. Its really small and the track rubbers are scrap
Mech Jamie?? :P
I'm guessing its a drain inspection camera and its hard to judge the size
from the picture but I guesstimate its 30-40 cm wide x70-80 cm long.
Its too far for me to view it but its still available in my e bay browser.
"This was designed and used to inspect the torpedo tubes on the mod submarines.
Though I have no evidence of this the motors have a radius on each side underneath to suggest it was designed to do this or similar.
The camera is manually adjustable up and down again to suggest that you would alter to the diameter of the tube/tunnel.
It measures 350mm wide 500mm long."
And think I'll pass Tony, if all the stuff is seized. Bit on the small side too!
Too right, looks like scrap.