Printable View
Please keep this thread just as a database.
Um........(not sure of the name yet)
Status: Under Construction
Weight: About 11.5kg
Weapon: Low pressure axe cocked at 115 degrees.
Speed: Either unknown or embarressing
(Message edited by touchwood on February 17, 2008)
Name: Asguard
Status: Design just finished
Weight: 13.6 kg
Weapon: LP Axe
Speed: 8mph
Name: Flipping Nora
Status: Finished apart from weapon
Weight: Prob too much by the time its finished:wink:
Weapon: Flipper
Speed: Fast!
Name: Hornet 2
Status: Undergoing various upgrades
Weight: 13kg before upgrade
Weapon: Vert disc
Speed: no idea on drive and fast enough on disc :)
name - PloughBot Evo
Status - chassis mods and whole new lifter being done soon (hopefully for burgess hill)
Weight - 11kg
Drive - 2 x astro 940s with 15:1 custon gearboxes, 4wd. 9 MPH
Power - 6 cell (22.2v) 4500mA Lithium Polymer batteries. Vantec RDFR23 speedcontroller with built in Low Voltage alarm.
Chassis - Full titanium, soon to be modified to make it even stronger in places, Carbon fibre battery cover.
Armour - Hardox/stainless steel, Mild steel all of various thicknesss.
Weapon - electric lifter, 88 degrees movement in less than 1second. Selffrighter built into the back of lifting arm. All changing soon.
Notes - Can push a small car :)
Shouldnt it be Asgard? (Nors Mythological place where the gods live)
Yes Leo, you are right thanks.
name - Hello Dave
Status - Speed Controller testing then adding final armour and weight reduction.
Weight - around 14kg due to wotty
Drive - 2 300watt scooter motors 4:1 10mph
Power - 24volt 3.7amp tornado pack, wotty speed controller
Chassis - Nylon
Armour - 12mm nylon sides 8mm HDPE every where else
Weapon - Sadly lifting prongs taken out due to wotty :sad:
name - BonX
Status - chassis mods
Weight - 10.5kg
Drive - 2 x speed 900 with 6.5:1 custom gearboxes, 2wd. 23 MPH
Power - 20 cell (24v) IB3600 Nimh baterry, Sidewinder
Chassis/Armour - Fully welded Hardox Monocoque thickness from 3.2 upto 10 mm
Weapon - F=M*A
so Tim No active weapon ?
Hi Guys
2 more for the 2008 pot
Name: Bio-Storm
Status: Up and runnin
Motors: 3 x 35w bosch
Power: 2 x 3700 12v Nimh IBC speed controller
Weight: bout 12 kish
Weapon: Linear acuator 4 bar lifter
Speed: fastish
Name: Fire Fly
Status: Up and runnin
Motors: 3 x 35w bosch
Power: 2 x 3700 9.6v Nimh Scorpian speed controller
Weight: bout 12 kish
Weapon: Linear acuator front lifter
Speed: fastish
Cheers Froggy
BonX doesnt have a weapon, but i might add a electric lifter if i can cram it in.
Name: Hells Angel Evilution
Status: Under construction
Motors: TWR 18s
Power: 24v NiMH battery, Scorpion XXL speedo
Weight: Unknown, but likely to be 13.6kg
Weapon: 10Bar operating Axe
Speed: Quick ! (if my new wheels work well)
Armour: 10mm HPDE side and lid, 3mm Steel scoop
Mayhem version 3
Name:Mayhem
Weight:12.2kg
Power:36v 5 packs of 7.2v nihm
Drive:2 speed 900s running 21v
Speed Controller:2 victor 883 and a 36v electronize for the axe
Wepon:36v axe running of a scooter motor
Armour:4mm aluminium foam mouted 1.2mm stainless steel
status:still in build hopefully ready for colchester
(Message edited by team_mayhem on February 19, 2008)
Name. Mininova.
Status. Under Construction.
Weight 13.6 Hopefully.
Drive 2 x 18v drill motors.
Speed controller Scorpion XL for Drive.
Speed controller for weapon ?
Weapon 4kg Horisontal Disc.
Ali and Ti.
Pic on profile of progress.
My latest robot and one which I have built entirely on my own (its my D.T GCSE project)
Name- Tidal Wave 2
Weight- Roughly 11kg at the moment
Drive- 2x MFA 50:1 motors running 70mm wheels
Batteries- 2x 12v Ni-Mh
Control- Electronize 15Amp (will change to scorpion XL or sabretooth), Spektrum DX6 radio
Weapon- 16 bar CO2 flipper
Construction- HDPE & Ti
Pic of todays test flip on profile
Full video here- http://www.youtube.com/watch?v=oWv4JfzQgaQhttp://www.youtube.com/watch?v=oWv4JfzQgaQ
Build pics- http://s216.photobucket.com/albums/cc274/will_teamocean/Tidal%20Wave%202/http://s216.photobucket.com/albums/c...al%20Wave%202/
looking good will, done any self righting tests?
Just when you thought we couldnt get any more robots heres another one :lol:
Since Aftershock was overweight it has now had an extensive weight loss and rebuild so I decided to rename it as well.
Name- WHIRLWIND
Weight- currently 13.2kg
Drive- 2x 18v drills
Batteries- 2x 12v Ni-Mh packs
Control- Scorpion XL
Weapon- Full Pressure CO2 flipper (with a tiny 32mm bore, 50mm stroke ram)
Construction- welded 5mm HDPE & 2mm steel
Notes- FP system is from Cutlet 540
Pics- http://s216.photobucket.com/albums/cc274/will_teamocean/Whirlwind/http://s216.photobucket.com/albums/c...ean/Whirlwind/
Will are you stil looking for a new flipper arm? becuase my sponsor is coming to the Stoke event
I will probably wait until after the UK champs (the current one may get even more damaged so ill leave it for now)
Also i have finished Tidal Wave 2 and have uploaded a compilation of all of the test videos here
http://www.youtube.com/watch?v=1uvsdnIt3B4http://www.youtube.com/watch?v=1uvsdnIt3B4
If it is not needed for moderation at school it may well be out to play soon.
Will
http://www.teamshock.4mg.comwww.teamshock.4mg.com
Hi Guys
To answer those who asked....bio storm has been recycled into....
PURE EVIL 2...pic on profile
drive....2 x bosch 35w
power....2 x tornado 3700ma Ni-mh
control..Scorpian XL...dx6..br6000
axe control....H6 with limit switches
Axe Power 300w scooter motor at 8:1 ratio
body....bright yellow 12mm HDPE
Comments....carefull with the axe Eugine (for the older members only).....:)
Cheers Froggy
http://www.team-moon.com/robots/eugene/robot.htmlhttp://www.team-moon.com/robots/eugene/robot.html
thanks woody.......:lol:
Sniff... now Im old because I understood the comment.
:)
btw, I really like it, hopefully it will perform as good as it looks.
Very nice, is it going to be at the featherweight champs?
I doubt it, Froggy doesnt tend to stray too far from home
Awesome robot Froggy :)
prodigy evo v2
horizontal single toothed, hardox disk (weight unknown since conversion but was 3kg)
Weapon drive:-
2 speed 900 motors running on 24v into custom mario gearbox
drive:-
2 speed 700bb turbo motors on 12v with custom mario drive gearboxes.
Armour:-
20mm hdpe back and sides with 10mm lid/base
Power:-
3 X 12V 4000mah nimh packs, sabertooth 25a controller, solid state relay with technobots battleswitch for weapon.
originally built and designed by mario and leo. some inevitable reliability issues in competition now sorted,(wont be snapping any more belts!) single tooth conversion by robochallenge.
will post pics on youtube once tested with single tooth, but old link below when it had 3 teeth. speed of disk is unknown but it is blimmin fast!
24 volts
http://www.youtube.com/watch?v=TlFBuJjIh9Ahttp://www.youtube.com/watch?v=TlFBuJjIh9A
http://www.youtube.com/watch?v=BA7rCSAL0OQhttp://www.youtube.com/watch?v=BA7rCSAL0OQ
(Message edited by promo robots on May 07, 2008)
Our guestimation is 8000-9000 rpm on 24V. Its really fast.
cheers leo, heres hoping i can do yours and robochallenges hard work justice.
Second place after Hannibalito is good enough Adrian. :)
more like
1.beauty 2
2.beauty 3
3. hannibalito
4. LF
15. prodigy evo
na it could be a year for the spinners - would be good if it was but its not going to be :)
I wont count those non spinning eggs Little John.
Plofbox is getting a few tweaks.... and the 1.6 kg Ridouan got for a new years present arent wasted.
this is going to be a really good competition, i think a spinner will win the comp this year, leo have you got a pic of hannibalito, i dont think i have ever seen it, and is plofbox the one thats similiar looking to hornet, dont know Ridouan either,
nah, its the boring Å“ber-brick thats gonna win. :P
Plofbox 2 is the vertical spinner that was there at the Robochallenge European Champs last year. Ridouan is the deafmute roboteer, perhaps you remember him then.
yes, i remember now. will be good to see you guys and your machines.
pic on profile of stage 1 improvements for prodigy evo, single tooth conversion and new weapon drive cheers grant :wink:, great job, this baby will keep spinning now no matter what it hits.
next will be titanium armour, and that will be it.
(Message edited by promo_robots on July 19, 2008)
Name:Axeadent
Drive:2 x 12v drill motors
Armour:5mm/8mm polycarb/2mm aliminuim
Chassis:10mm polycarb
Weapon:LP Axe with 1.6kg Axe head
Yeah,get ready for it.
I look forward to seeing Axeadent this year Dan, as I know you were originally aiming for last years tag champs but since took a break to focus on exams etc (just about to enter a temporary one myself for uni resits, last chance saloon)
Hope youre able to get it all up and running, and make sure to supply some build piccies :)
P.S. Just out of interest, why did you change the name to Axeadent again? I personally thought Lumberjack was quite cool and fitting for an axe robot