Drill shafts

Hey hey,

Bit of a less common one, but on the lookout for some drill motor shafts, ala:

http://i31.photobucket.com/albums/c3...k3_build14.jpg

I've got tonnes of drill motors and gearboxes but running out of shafts (a lot of the gearboxes came from old hammer drills, where the output shaft just slips out of it) so could do with redressing the balance without having to buy entire motor/gearbox setups. Perhaps if anyone has any old cracked or broken gearbox housings that they were thinking of chucking out? So long as the shaft isn't bent I'd be interested. Or if you really want to bin the housing, the shafts are held in place with a circlip and some ball bearings, so if you get rid of all that you can just hammer the shaft out, bin the broken gearbox housing and I'll happily take the shaft off your hands :)

Muchas gracias

Funnily enough I was looking through my box of drill parts thinking what the hell am I gonna do with all this?!. I'll have a check tomorrow morning and let you know what I have kicking around.

Ta muchly