Hi, Im going to be doing build diaries on some of my projects so some people can keep up to date with what im doing.
Printable View
Hi, Im going to be doing build diaries on some of my projects so some people can keep up to date with what im doing.
cool good to hear, will be nice to see how your vorizontal is comming along:)
First of all ill just show what iv done to Relentless
Before: (14.4V, 2 Speed 900s, Elecronize Speed Controllers)
[attachment=1:ew7el6h4]IMAG0536.JPG[/attachment:ew7el6h4]
Now: (28.8v, 4 Speed 900s, Sidewinder Speed Controller)
[attachment=0:ew7el6h4]P17-08-09_22.30.JPG[/attachment:ew7el6h4]
Now for what im doing to Savage Evo
This was it after the UK Champs
[attachment=2:u2avtngm]P15-03-09_14.45.JPG[/attachment:u2avtngm]
Now this is what I have being doing to it
[attachment=1:u2avtngm]P16-08-09_19.36.JPG[/attachment:u2avtngm]
I took it appart to replace a broken drive motor and found the frame was twisted and there were a few broken welds.
[attachment=0:u2avtngm]P16-08-09_19.42.JPG[/attachment:u2avtngm]
I cleaned and rebuilt the gearbox for the spinning disk.
[attachment=1:1ktcr3xu]P16-08-09_20.59.JPG[/attachment:1ktcr3xu]
I welded up a few of the broken welds and braced the frame a little more. I also tilted the disk down at the front a little, Then I had to reposition the gearbox so the belt pulleys were inline. Then I gave it a quick coat of black primer with a big old paint brush. Not quite as good as my other paint jobs with the airbrush eh?[attachment=0:1ktcr3xu]P17-08-09_09.57.JPG[/attachment:1ktcr3xu]
lookin sleek n sturdy, now go and build a vertical :)
Ill try get a test video up tomorrow. Batts need charging and i need to bind it to the DX7 then it should be good to go.
lookin sleek and mean :)
any pics of its insides?
Wow, it looks so much more mean just by being all in black :shock:
Nice work.