Hunter Rebuild: PARTS WANTED!!!!

Hi All
After Brentwood, me and my dad decided to rebuild Hunter.
Me and my dad are planning on a hardox low pressure flipper.
Dave W has some small rams (dont know how small) which he'll give to me for free, but incase theyre to small (he's gonna tell me size later) then i'll need to know where i can get some rams.
Plus, as it says above, i'll be needing some hardox, can i get it online or via you guys?
Plus, we'll be needing some of the other pnumatics stuff (co2 tank, valves, ect.)
Also, im hoping (well, my dad) is hoping for it to be slightly cheep.
If its worth it, we may pay up to about £50/£100 on rams (i want it to flip other feathers, and hopefully get them into hazards, also to self right)
Quite a list, i know.
Me and my dad are sticking to our original motors from Hunter 1, so we will surely have some speed (tonnes of speed, if you've seen Hunter go!)
We're going to switch to nicad batterys and spectrum transmitter, keeping our speed controller.

Get the hardox from JL Steel

http://www.jlsteel.co.uk/steels.html

Depending on the amount you need they sometimes offer a service where you pay a donation to your local hospice

e-mail and ask for a quote but they are really nice and helpful

BTW what motors setup do you have? (never seen your robot b4)

alex

Well, the drive set-up we have in hunter at the mo is chain drive.
We may go to another chain drive set-up for Hunter 2, or not, most likely chain drive.

hey, post some pictures up on here so we can have a look.

How did Hunter get on at its first event Matt?

Ok, will post later

Hunter got on ok, first fight was rather short, but then the second i lasted the whole fight (almost)
I'll upload videos later.