FRFFT: The World Championships
I cant believe this is the fifth tournament I have done in between this month and September 2008 when I joined the FRA Forum. Thats a 7 month gap. Youre probably moaning that I should have better things to do, in which I do, but I think youll find this competition interesting.
I need 4 people to enter 4 robots each, one in each weight class
Featherweights: 1kg to 12kg
Middleweights: 24kg to 50kg
Heavyweights: 50kg to 100kg
Superheavyweights: 100kg to 200kg
Its a small affair, I know, but I think its for the best. You need to pick a country to represent. Ill take real robots, but they must come from where they do in real life. All of your robots can represent the same country or they can represent individual countries. The weight limits are doubled for walking robots
This time, well be using the house robots. The arena will be the Series 7 arena
Normal Robot Wars rules apply. Thank you and good luck! :)
FRFFT: The World Championships
hmm... I think Ill bring some new designs out of this one...
Reserve me a spot and Ill have my stats up later tonight :)
FRFFT: The World Championships
Featherweight: 360 (realie, United Kingdom)
Middleweight: Steel Sandwich (realie, Canada)
Heavyweight: N³ (vapour, stats on ZED, United Kingdom)
Super Heavyweight: Drive (vapour, stats on ZED, United Kingdom)
FRFFT: The World Championships
FW: Small System Shock
Robot Name: Small System Shock
Shape: Tracked box with a Tornado style wedge on the front and skirts at the sides and rear
Weight: 14.96kg (10% weight advantage for tracks)
Length: 25cm
Width: 40cm
Height: 8cm
Motivation: 2 x titanium tracks coated with vulkalon, one on either side of the robot, protected from the sides but exposed from the top and bottom so it can run inverted.
Drive: 2 x Astroflight 940 cobalt magmotors run @ 24v from 2 x custom-built 2.4mAh NiCad packs
Armour: 3.2mm hardox monocoque
Weaponry: The robot is a very powerful, but controlled pusher and has the wedge on the front to get under other robots to push them around.
Speed: 15mph
Turning Circle: 0
Ground Clearance: 0 at front and effectively 0 all round due to 5mm skirts made of grade 2 titanium, but there is 10mm clearance behind the skirts.
Srimech: The robot runs inverted
Colour: Light blue with the name written in yellow on top
Strengths: Very well armoured and strong
Weaknesses: No active weaponry
Notes: The original System Shock was a pretty successful rammer, coming second in the 128-robot Crash and Burn: Dual Duels with its team-mate Firefly. However it was very basic, and so was upgraded pretty quickly, but here it is reincarnated in featherweight form.
MW: The Eviscerator
(stats later, hopefully tonight)
HW: Toad
Robot Name: Toad
Shape: Box wedge with sloped sides and rounded rear, plus two Wedge of Doom style scoops on either side of the front wedge
Weight: 100kg
Length: 60cm
Width: 85cm
Height: 9cm
Motivation: 4 x HDPE wheels, 97mm in diameter and each with a vulkalon coated foam-filled tyre
Drive: 2 x S28-400 magmotors run @ 24v from 2 x NiCad battlepacks
Armour: The Steel bar chassis is built on the outside of the robot, providing an exo-skeleton protection so that spinners cannot damage it, as they won€™t actually hit the armour itself, plus it could stop some axes from hitting the armour too. The actual armour is 12mm lexan and Lexiguard compound.
Weaponry: Hinged at the rear of the robot there is a 4mm hardox arm, 75cm in length and powered by a powerful linear actuator that will see it lift to almost vertical in 3 seconds, but this can be swapped for an S28-400 magmotor that can raise the arm in 1 second. Also at the end of the arm there are various attachments:
- A tungsten static spike, curved down and then up slightly so it can get under other robots and then snag their wheel holes when lifting them.
- A Crushtacean style claw, made of tungsten and drilled with speed holes, operated by a Litton motor @ 36v to grab so the arm can then lift.
- A 5mm hardox War Machine-style scoop, perfect for defence against spinners.
- A small tungsten tipped Pussycat style saw blade, powered by a Litton Motor @ 36v. This can be used for invertible opponents in order to damage wheels or tracks.
- A horizontal tungsten claw ala Big Nipper, powered by a Litton Motor @ 36v
Speed: 15mph
Turning Circle: 0
Ground Clearance: 0 at front due to wedge and scoops, 7mm at sides is protected by 5mm thick grade 2 titanium skirts, 5mm at rear
Srimech: The rounded rear allows the arm to right the robot easily
Colour: Black, with gold outlines and flames on the top and on the scoops
Strengths: Interchangeable weaponry, good armour against spinners and axes
Weaknesses: No real damaging weaponry, crushers could get through the armour
SHW: Omega-Rex
Robot Name: Omega-Rex
Shape: Box with a steep wedge at the front
Weight: 200kg
Length: 90cm
Width: 90cm
Height: 25cm
Motivation: 6 x internal HDPE wheels with vulcanised wheels, 125mm in diameter
Drive: 4 x Briggs & Stratton E-Teks run @ 60v from 12 x 3600mAh NiCad battlepacks
Armour: 12mm hardox monocoque
Weaponry: A huge Matador-style 12mm grade 5 titanium flipper, hinged at the back of the robot and powered by dual 120mm non-attached rams @ 1000psi (can be cranked up to 2400psi if the tournament allows it) from 2 x 4kg nitrogen tanks to give 35-40 flips!
Speed: 20mph
Turning Circle: 0
Ground Clearance: 0 at front, 10mm at sides and rear
Colour: Gold with silver outlines
Srimech: The flipper stylishly self-rights the robot in a high flip
Strengths: Powerful flipper
Weaknesses: High ground clearance at sides
FRFFT: The World Championships
FW:- Micrompression
MW:- Hyper Ventilate
HW:- Vengeance
SHW:- Vertigo
UK
FRFFT: The World Championships
Save me a place, please, going to re-work a few of my otherweights for this.
FRFFT: The World Championships
Robot Name: The Eviscerator
Shape: Reverse Kill-o-Amp
Weight: 50kg
Length: 50cm
Width: 45cm
Height: 25cm
Motivation: 2 x internal HDPE wheels with vulcanised tyres, 270mm diameterand they are towards the front of the machine
Drive: 2 x Bosch 750w motors run @ 28.8v from 2 x 3600mAh NiCad battlepacks
Armour: 3.2mm hardox
Weaponry: MOE-style Ditch cutter blade at the front of the robot, powered by an S28-400 magmotor run @ 24v, it weighs 15kg and spins up to 2500rpm in 3 seconds. Should be very nasty for a middleweight weapon
Speed: 18mph
Turning Circle: 0
Ground Clearance: 10mm
Colour: Red with silver outlines and the nbame written in yellow on either side and the top
Srimech: Invertible, spikes on the side prevent stranding
Strengths: Powerful weaponry
Weaknesses: wheels exposed to axes and crushers
FRFFT: The World Championships
All the spaces are filled up. Thanks guys.
Liam, there isnt actually a bonus for tracked robots in this competition, but Ill put it in for now to avoid any conflict
Joey, I need info on 360
AJ, I need your stats
Re: FRFFT: The World Championships
Right, I'll enter these:
Featherweight - OverDrive (England)
Middleweight - Typhoon (Scotland)
Heavyweight - Fissure (England)
Super Heavyweight - UberForce 2.0 (Germany)
Hope that's OK.
Re: FRFFT: The World Championships
Here is the lineup.
Featherweights
360 (UK) VS Overdrive (England)
Micrompression (UK) VS Small System Shock (???)
Middleweights
Steel Sandwich (Canada) VS Hyper Ventilate (UK)
The Eviscerator (???) VS Typhoon (Scotland)
Heavyweights
Vengance (UK) VS Fissure (England)
Toad (???) VS N3 (UK)
Superheavyweights
Omega Rex (???) VS Drive (UK)
Vertigo (UK) VS Uberforce 2.0 (Germany)
Supersporty: I assume you are Lewis?
Swimm3r: I can't remember who you are? Can you please tell me which country your robots are representing?
Thats all for now. If you are lucky, the first fight will be in a few days :)