Printable View
+1>AJWars: Era Ache
It€™s 11 months since I started AJWars: Another Era, so I€™m going to do another! As with A New Era and Another Era, this tournament will be a simple straight knockout tournament between eight vapourbots.
The battles will be held in the new http://strickenone.proboards99.com/i...&page=1Pyramid
Ill enter Nitro-Gene 5.0 into this one. Stats are in the usual place :proud:
lethal weapon
http://strickenone.proboards99.com/index.cgi?board=berserkedvapours&action=display&th read=657http://strickenone.proboards99.com/i...s&action=displ ay&thread=657
Id like to enter Flank Attack
http://farr.proboards21.com/index.cgi?board=targeted&action=display&thread=481http://farr.proboards21.com/index.cg...lay&thread=481
Excellent, thanks guys!
1) No Consequences - Joey McConnell
2) Martijn Benschop - Reserved - 48 hours remaining
3) Dan Stickler - Reserved - 48 hours remaining
4) Nitro-Gene 5.0 - Paul Cuomo
5) Lethal Weapon - Tony Politzi
6) Flank Attack 2: DT - Alex MacWilliams
7)
8)
Ill enter with Whiplash.
Whiplash
Weight: 100kg
Body Shape: Pentagonal Pyramid with skirts
Dimensions: 100 X 85 X 38
Power: 2 X LEM-130s at 36v powered by 4 X Nicads
Tyres: 4 X Asmaprene Urethane Rubber Tyres
Speed: 15 mph
Armour: 4mm Hardox
Ground Clearence: 0mm with skirts, and 5mm without skirts
Weapon 1: SHEER PUSHING POWER
Weapon 2: At the front there is a 7kg Terrorhurtz-Like BattleAxe (made out of hardox, even the handle) powered by 2 X 2kg CO2 Tanks, 200 PSI, diamond tipped, has over 1500 joules of force when it comes down. It can also attack from both ends. Heavily Shock-Proofed, as well.
Srimech: The axe can easily self-right it (even when its on its side), and it can also self-right even after the axe has fired, ala Killerhurtz.
Strengths: PSYCHOTIC AXE AND PUSHING POWER
Weaknesses: NONE AT ALL! (Except for Limited Co2)
Robot Name: Monsoon Season
Dimensions (L x W x H): 90cm x 80cm x 35cm
Shape: Box wedge, slanted sides and steep rear wedge.
Colour: The main body shell is black, with the flipper/ramming plate in bright green. The sides of the machine have skulls drawn on them in the same colour green as the flipper/ramming plate.
Weight: 100kg
Drive: 2 x LEM130s running at 36v, powered by a bunch of 36v NiCads.
Top Speed: Approx 15mph.
Tracks: This version of Monsoon has tracks instead of wheels. The tracks are made from Titanium/Vanadium alloy and have Vulcalon pads on every section of track in order to fully incorporate grip on the arena floor.
Armour: The baseplate is 5mm Titanium. The main body shell is constructed from a single piece of 30mm HDPE. The flipper/ramming plate is made from 4mm Hardox and covers the whole of the front of the machine.
Weaponry: At the front of the machine is a 4mm Hardox flipper/ramming plate, similar in style to Atomic from Series 7 of Robot Wars. The flipper/ramming plate is powered by 2 x 80mm bore 60mm stroke pneumatic rams, run off CO2 gas contained at 1000psi. The gas is held in 3 x 1.1kg CO2 gas canisters inside the robot, and should allow for plenty of flips in a battle (roughly 35 flips). The front of the machine can also be used as a ramming plate, allowing Monsoon Season to use its enormous pushing power as well as the ability to flip its opponents clean out of the arena.
Turning Circle: 0m
Ground Clearance: 0mm at front, 7mm at sides and back.
Srimech: Flipper.
Mememememe!
Ill get to work choosing my entry ASAP! :proud:
EDIT: Sorry, I thought Steve had reserved.
(Message edited by Dinowarrior on March 06, 2009)