Martyn’s 2nd World Championship qualifiers (sign up)

Martyn€™s 2nd World Championship qualifiers (sign up)

Ok so the rules except robot numbers and number of entries are the same as MRWS 5 so that€™s simple enough.

Ok pretty much everybody enters two robots each. Each robot entered by each person must represent country as only 2 robots can represent a country.

The robots that automatically qualify are Giga Byte (England) and Killotine Evo (France) as they were runner up and winner of the 1st world champs. Therefore Andy and Steven can enter 2 robots on top of these so therefore can enter 3 robots each.

So that€™s pretty much it so get sinning up.

You dont need to be in MRWS 5 to enter

(Message edited by martyn on August 26, 2005)

For my Home-land - Chalkie 3G
For the channel islands :proud: - Seggy 4

:proud: TEAM BRAVEHEART :proud:

Killy: EVO for France, obviously and:

1) Clawdius Decimus Murderous (Italy)
2) All Scoop And No Stab Make Steve A Dull Boy (Scotland)

Stats ere: http://thdcrobotics.proboards33.com/index.cgi?board=Bravehearthttp://thdcrobotics.proboards33.com/...ard=Braveheart

Hope that suffices :)

Ok new rule it must be a real country so dave you need to come up with a country for Chalkie 3g to represent

Ill have Tengu for Japan and kali for Ecuador, I know Im from england, but Europes not particularly interesting place.

Chalkie 3G for Canada

Representing the Netherlands-Axe to Fall
Representing Belgium-Back to Rock

current stats can be found in Steves PTT 5 thread, but Im thinking of some restating so please save me this spot till I get them restated :P

actually, change kali to dante

Representing Wales: SYNDOS
Representing Gibraltar: Snakebite IV

SNAKEBITE 4
Weight: 110kg
Shape: Low invertable box with wedge shaped like a snakes head at the centre of the front, skirts at either side of the wedge and rounded sides
Dimensions: 90 x 70 x 23
Speed: 18mph
Ground Clearance: 0 at front due to low wedge and skirts, 0 at sides due to skirts, 3mm at rear
Armour: Body is 4mm Hardox; skirts are 3mm titanium
Movement: Camshafts like Drillzilla
Power: 4 Perm 080s motors on 24V powered by 24V @ 12amp batteries
Weapons: At the centre of the front is a 40cm wide wedge with a titanium edge for getting under skirts. The wedge is split horizontally down the middle and opens up like a jaw hydraulically - this is designed for lifting rather than flipping, and can also clamp on low robots that it gets under. On either side of the wedge are skirts which help get under other robots who arent on the wedge. The skirts and wedge both flop down when inverted so can be used either way up. At the rear is a horizontal MOE-style 8kg 2500rpm spinning blade.
Srimech: Invertable; rounded sides prevent it resting there
Tactics: Try to get under robots, lift and shove them around, and damage them with the blade.
Strengths: Fast; good traction; well armoured
Weaknesses: Low flippers can get it at the rear; has difficulty flipping opponents

SYNDOS (SLICE N DICE ON STEROIDS)
Weight: 96kg
Shape: Invertable box with rounded sides and rear
Dimensions: 60 x 60 x 45
Speed: 12mph
Ground Clearance: 4mm at front, 0 at sides and back due to skirts, skirts are sprung for extra lowness
Armour: 4mm Hardox
Wheels: 2, inside robot, with RC gyro for extra control
Power: 2 Perm 080s motors on 24V powered by 24V @ 12amp batteries
Weapon: 25kg 3000rpm titanium vertical spinning disc at front
Srimech: Invertable
Tactics: Mash with big-a** disc, and try to flip as well.
Strengths: Powerful weapon; low ground clearance
Weaknesses: No weapons on sides and rear; a bit on the slow side

Ill have Cyclone Force 2.5 doing it for Eire and Axe-O-Lotl for Mexico