just want to check is this type of tx allowed for heavies as i know the old 40mhz are no longer allowed
Spektrum DX4e DSMX 4-Channel Full Range
Printable View
just want to check is this type of tx allowed for heavies as i know the old 40mhz are no longer allowed
Spektrum DX4e DSMX 4-Channel Full Range
TX is fine, just make sure you can failsafe on all channels on the RX.
should be ok, on vantec and the flipper has an fs1
It wont. as the RX will output a valid signal (normally last position), the FS1/Vantec won't know. You need an RX that either stops sending a signal when in failsafe (therefore your vantec/FS1 would kick in) or a RX that will allow you to set the failsafe positions.
ok good points there,
as im coming back into this after being out a while could you recommend a few radio sets that would be suitable
many thanks
the spektrum transmitters are good you would just have to get a receiver that has failsafes
http://www.ebay.co.uk/itm/New-Orange...item3cd6801140
or buy some external failsafes
http://www.ebay.co.uk/itm/B7044-RC-N...item4d135c27f2
so basically if i get a spektrum tx and an orange Rx that covers all bases on the fail safe side of things