Printable View
hi guys im adam 25 from nottingham
please have a look at my first axe robot below
some standard equipment and some custom please comment on this mark three version
took along time to get the weight down within spec
sorry no pics yet will not let me upload file to large any ideas thanks not a computer fan!!!!
Most people upload to Photobucket then link the photo using the img link from under the photo. Will make more sense when you use it yourself.
if you open the photos in paint and re size them to 35 x 35 instead off 100x100 then they will upload
Had a good try, hopefully this should be the link, thanks
http://s1323.beta.photobucket.com/user/ ... rary/robot
http://s1323.beta.photobucket.com/user/ ... rary/robot
this link should work, thanks for ideas, please comment
It looks very nice, how well does it drive?
Control from cheap esc not to bad very sensitive when turning, full speed quite low as only running 12v but axe control via 30 amp elecrtonize (not sure on spelling) seems to be fine.
ebay esc do cut in and out on heavy imnpacts looking to remedy this by removing all small connectors inside and direct solder if not just replace with my 2x10 sabertooth should be ok at 12v with drill motors
Looks very good! Have a look at botbitz website (www.botbitz.com) if your interested in some new speed controllers
Looking good. Just finishing off my axe bot. I looked at those motors for the axe (in fact I bought them) but ended up with Gimsons due to the weight
I have tz85a's for drive which I hacked myself - nice and light, work pretty well. They do have a bit of a dead zone around centre
Thats really cool, hope to fight it some point soon :)