Printable View
There is probably a tread for this already but given as I can€™t find it...
Is the following a suitable electronic set up? Currently I only use the receiver, BEC and batteries in the prototype, but it all needs upgrading to what in the schematic.
I know I am missing fuses, but I don't know where in the system they go!
Alex
Looks fine.
[attachment=0:svsow5kw]shrapnel.jpg[/attachment:svsow5kw]
IF you want to use fuses to protect the controllers you will want one for each controller...this is usually by convention in the positive supply wire .
Thanks, I am so gald that it works! :D And Because I would rather not cook the ESC's, I will add some fuses
Would just use one Elctronize switcher for the weapon, switching a big relay (or 2 relays, one for each), you'll blow the relays in the electonize trying to run the speed 900's through them.
Does anyone know of a good place (in the UK/online) to get a decent relay?
I've found a few 24v 60a + rated, but in the US or on supplier sites that only distribute.
By 'decent-relay' a solid state one comes to mind: http://www.jaycarelectronics.co.uk/prod ... rm=KEYWORD
Those ones still get sent from Australia, but the delivery cost is not too shabby as is delivery time. Definitely better to get a solid state relay than one with mechanical bits.
i have yet to blow one of those. One of the few electronic parts that has yet to go on me. Even handled a mini magmotor stalled for a number of seconds. Just mount it to some metal to act as a heatsink.
Cheers guys!
whats the mixer used for in the diagram? its that for the motors?