http://www.rcgraveyard.co.uk/orange-rx- ... -150-p.asp
Saw this and thought i'd post it in case anyone was interested
Printable View
http://www.rcgraveyard.co.uk/orange-rx- ... -150-p.asp
Saw this and thought i'd post it in case anyone was interested
Be interested to know if it failsafes on all channels though.
The only one I know that does is the br600 which is extinct now?
yes same here
We use the AR500 mainly. This is slightly different from the BR6000 though. The BR6000 returns to a pre-programmed position whereas the AR500 gives no output. Both are normally suitable.Quote:
Originally Posted by Danjr1
The BR6000 is suitable for use with the DX5e, DX6 and DX6i but the AR500 will work with the Dx5e and DX6i as it is DSM2.
Andy
http://www.hobbyking.com/hobbyking/stor ... eiver.html
out of stock at the moment but nice and cheap and goes to preset failsafe position on all channels
I use one of these and as far as I am aware, it's similar to the AR500 which, as Andy mentioned, gives no output. So you can either use ESCs with built-in failsafes or use external plug-in ones. That's what I do anyway, and it seems to work :)Quote:
Originally Posted by cliveb