• Forum Posts

      Outlaw

      Project Squirrel

      So 12mm sounds good to me, and I'm think of using the silver steel. I'm a bit of a dipstick and I looked back at one of my previous posts/questions about

      Outlaw Yesterday, 16:58 Go to last post
      Mr Manuva27

      Robodojo 2022/2023

      Well, first things first.

      I am delighted to say that I'm officially a member of the Robodojo committee and an officer for the featherweight

      Mr Manuva27 Yesterday, 11:49 Go to last post
      Ocracoke

      Team Kaizen Build Diary

      Extreme Robots Portsmouth 2022

      So for this year, I am no longer running solo as I've got a friend, Dan, on board with the wholer roboteering

      Ocracoke Yesterday, 11:23 Go to last post
      Ocracoke

      Project Squirrel

      Jibril 1.6, the final incarnation of that version, used a 12mm steel shaft for the first stage and a 10mm titanium shaft for the second stage. For a MW,

      Ocracoke Yesterday, 10:52 Go to last post
      Outlaw

      Project Squirrel

      Quick question (apologies for the continuous amount of them), what would be the recommended diameter for the shaft, from previous experiences if you have

      Outlaw 22nd May 2022, 23:22 Go to last post
      Outlaw

      Project Squirrel

      Right, I get it now, thank you so much. I'll get to adding everything up and go from there. Many thanks!

      Outlaw 19th May 2022, 17:19 Go to last post
      Ocracoke

      Project Squirrel

      Each stage is a multiplier. 8:1 x 8:1 = 64:1 so you'd want say a 2:1 on the first stage and then a 4:1 on the second.

      Ocracoke 19th May 2022, 16:58 Go to last post
      Outlaw

      Project Squirrel

      I apologize for all the questions, my math is absolutely atrocious, but would this mean that in order for me to get an 8:1 ratio, it'd basically be a

      Outlaw 19th May 2022, 16:49 Go to last post