So 12mm sounds good to me, and I'm think of using the silver steel. I'm a bit of a dipstick and I looked back at one of my previous posts/questions about
Outlaw Yesterday, 16:58Well, first things first.
I am delighted to say that I'm officially a member of the Robodojo committee and an officer for the featherweight
Extreme Robots Portsmouth 2022
So for this year, I am no longer running solo as I've got a friend, Dan, on board with the wholer roboteering
Jibril 1.6, the final incarnation of that version, used a 12mm steel shaft for the first stage and a 10mm titanium shaft for the second stage. For a MW,
Ocracoke Yesterday, 10:52Quick question (apologies for the continuous amount of them), what would be the recommended diameter for the shaft, from previous experiences if you have
Outlaw 22nd May 2022, 23:22Right, I get it now, thank you so much. I'll get to adding everything up and go from there. Many thanks!
Outlaw 19th May 2022, 17:19Each stage is a multiplier. 8:1 x 8:1 = 64:1 so you'd want say a 2:1 on the first stage and then a 4:1 on the second.
Ocracoke 19th May 2022, 16:58
Project Squirrel
Silver steel is OK. If you needed a upgrade to the silver steel, I sometimes have used tool steel bolts which are harder to bend.
Ocracoke Today, 14:36