Mad Metal Machines Volume 26 (2019) Playlist​
Mad.Metal.Machines.vol.26.Beetleweight.1,5.Kg.Round.1 (Maker Faire 2019 Hannover)
Premiere at the 15.12.2019 ... 18:00 o'clock London Time
...
Thanks for the compliment! I tried to keep things going and apply pressure, and keep on the bots without too much spare time off the ball. Hopefully we can resolve the motor issues so that method...
So Azriel is back together as it was for the 0.9 specthough the axe gearbox is slipping under the power of 6S LiFe batteries now, so that'll want remodeling. I am sure I can use some leftover MOD...
I would agree Nat, normally you could get almost continual use with a 50% over voltage but
there are other factors like the near stall factor of the motors when trying to push another bot.
...
12v motors should be ok at 16v, they have usually a 50% over specified power limit. Perhaps its the brushes snapping on the small copper arms internally due to the knocks they had from combat. That...
Thank's Andrew
Because I will be bringing 3 Robots for the next events I think a re-match is inevitable
with at least one of my Robots.
I'm not sure whether to rotate my selection of...
You did a sterling job just keeping them all running! Especially with all the motor burnouts. :?
I thought all three machines were running noticeably better as well. Good luck for next time!
Definitely up for a grudge match! Was looking forward to our fight and was gutted when BDR broke down. Just one wire from the ESC came loose.
Will be great to have a match with two machines at 100%!
December 1st Robodojo analysis....
Team Death took 3 Robots to the Robodojo and there were mixed results.
All the Robots performed better than they had before and in the Robot game it's important...
Thanks to all for your comments and feedback. I'm still buzzing a week later!
Based on what you guys have said, I've got all the parts on order to redo pretty much all the electrics for 4WD. So...
After a year hiatus, the Beetle Belt competition is returning to Greenich University. The IET on Campus Engineering Society plans to host an event with additional robot related competitions on the...
Well done, nice write up, looks like you had a great time at the event! I am intrigued by what the next machine is going to be, I'll be sure to keep an eye out for that.
As you may know, Robodojo occurred once again on Sunday and Wedgeley attended. This time, there were no major changes to the machine, we just patched up the minor damage from the last event and...
It was great seeing you and Bread Dead for the first time! Definitely one of my favorite events this year.
Your Sabertooth should be okay by my reckoning. Boring Wedgebot uses a 2x12, which is...
I am gutted I wasn't there for this one to see your bot in action, I had Azriel running for this and all. :( Anyway, well done on your first event!
Yup, I'd go for this. 14.8v over 11.1v...
Great write up, and great to meet you and see BDR yesterday! Congrats on your victory again and on your performance throughout the day. Those dustpans were amazingly effective, especially at scooping...
First off, well done at your 1st event! I've faced all of those bots in some capacity before & going 1-3 against them for your 1st event isn't bad at all. Regarding your 4WD query, I definitely...
Event Report - Robodojo December 2019
The moment I had been waiting for had arrived. The debut of Bread Dead Redemption.
Saturday
In the days building up to Robodojo, I had been frantically...
