Maxus middleweight

[Mouldy]

as per title.

2x brand new bosch 750s drive- never been used in anger.. done some mods to them, changed the bolts on the front for nuts and welded the front plates etc.

1x vantec 47e, in good working order

4wd with 125mm blue wheels

28.8v sanyo botpack nicads 2x3amp custom made packs

1/4 titanium armour front and back,4mm hardox sides, 4mm hardox base plate and mild steel angle frame

10mm aluminium bulkhead construction

comes with all the mechanical parts to finish the lifting mechanism and a DX5 set for the control (also only been used at one event)

lifting arm isnt quite complete- wouldnt take alot of work though.

E-mail me with offers - address on profile.

ask for pictures if you havnt seen it before

everything you need to have a working robot apart from the battery chargers

Dont really want to break it up for parts.

Regards
Dave

[swanaldo]

no need to ask why your selling dave. good luck on the new project dude.

[Mouldy]

shane, im giving it all up mate. just going to keep 360 on the shelf for whatever spinner events come up, if any.

highest bid so far is £500

[robotnut]

are you selling your robot turbulance mk1? how comes your giving up?

(Message edited by robotnut on November 24, 200

[Mouldy]

highest bid is £550 provisionaly sold- pending payment.

Andy the original turbulence was striped down and the chassis weighed in a year ago, the vantec is in maxus, some parts are now in apocolypse and the rest of the spairs are going to sit between mine and eds garages for a while until we find a use for them.

Ive been doing this hobby since i was 13 and im 20 on saterday...Won the top title during that time and not done much since so im going to have a year or so out of it to do other things while watching the sport progress from the sidelines.

[robotnut]

ok cheers, happy birthday for sat

[Mouldy]

Maxus now belongs to tom armitage.

new stuff

1x 24v Burket
1x pressure switch 10-20bar

Was going to use them as a regulator together in a heavyweight - there connected with some elbows, a pressure guage and a co2 nut. Will seperate the two for a decent offer

1 off bosch 750w motor, reasonable condition, was out of the original turbulence, has an 8tooth MOD 1.5 spur gear TIG welded to the output shaft. Brand new brushplate inside, in good working order, but could do with a clean

1 off bosch 750, same as above, but the armiture is abit discoloured, worked when we took it out of the old turb, but could probably do with re-winding and some TLC. (ask john lear- he can get them done for £25 aparently)

Both the motors have welded front plates.

Block of Grade 5 Titanium, 101.6x49x270. Weighs 6.44kg
Would be good machined into an egg beater style weapon for a featherweight?

1 off Norgen 16bar 50x160mm ram, brand new, never used.

Everythings open to offers. got loads more stuff that i need to sort out

[beast]

bt rewinds birmingham

lend us the burket

[Mouldy]

Burket and boschs provisionaly sold

[Mouldy]

Burket sold-

Got some bits of titanium, good for featherweights left- will post pics soon

low pressure rams and valves also - just ask.

got another guitar amp on ebay lol

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=250354285683&Category= 68247&_trksid=p3907.m29&_trkparms=algo%3DLVI%26its %3DI%26otn%3D2http://cgi.ebay.co.uk/ws/eBayISAPI.d...Category=68247 &_trksid=p3907.m29&_trkparms=algo%3DLVI%26its%3DI% 26otn%3D2