UP Plus 2 3D Printer

[PanoramicHarry]

Because of recent happenings and struggles I've been having with this printer, things have got to the point where I cannot afford to spend more money on this printer than I have been the past few months. So I am seeing if there's anyone willing to take this Up Plus 2 with minor faults off my hands.

Please note that this printer will need looking at or refurbishment by the manufacturer.

Minor faults listed:

• Stops after "Nozzle too hot" during printing, eveything will then cool down afterwards
• Nozzle detect is off by approx 1.3mm., will need manually adjusting/reduced before printing.
• Nozzle will be picked up as 394° even if completely cool.

Other than the issues, the printer itself will be in good working & printing condition when the minor faults are fixed.

Also including lots of spares:

• Hotends
• Partial Printer heads
• Fans
• Motors
• Printhead boards
• and more

Specifications:

• Machine dimensions: (W) 245 x (D) 260 x (H) 350mm
• Build volume: (W) 140 x (D) 140 x (H) 135mm
• Print material: 1.75mm ABS filament or PLA filament
• Layer thickness: 0.15 / 0.20 / 0.25 / 0.30 / 0.40mm
• Easy to use software - import .STL files from your CAD software

If anyone is willing to take this off my hands, PM any offers.
IMG_2490.jpgIMG_2491.jpgIMG_2492.jpg