Register To Comment
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Featherweight Horizontal Bar Spinner

  1. #11
    James Williams's Avatar
    Roboteer

    Status
    Offline
    Name
    James Williams
    Robots
    Neophyte (FW) Meteorite (FW)
    Location
    Birmingham
    Posts
    63
    That sounds like a good idea. There's a heavyweight called Dead Bod which has a horizontal bar for a weapon, but originally started out as just a rambot with a wedge, using the bar as an interchangeable weapon after they got the kinks worked out of the drive. It's definitely a viable strategy. I'm not sure if they have a build diary but they are quite active on the Extreme Robots facebook group if you want to check them out. Good luck to you.

  2. #12
    Ocracoke's Avatar
    Team Kaizen

    Status
    Online
    Name
    Michael
    Robots
    AW: Osu, Ikari, Ramu / BW: Shu!, Mita / FW: The Honey Badger / MW: Kaizen, ???
    Location
    Somewhere on the Wirral
    Posts
    780
    I went to RoboGames this year hoping to do the same but it turned out they were middleweights (I mainly went hoping to see Last Rites)!
    Nothing wrong with the Middleweights, they've only just started coming back onto the scene in the UK (though I confess to being a little biased, my "big" robot is a Middleweight). I would have said perhaps looking at Featherweights robots like Neon and in the Beetleweight category Ankle Biter II would be a place to look at for horizontal spinner designs.

    I'll have a think about starting out with something different, if I have time at the weekend I will see if I can design perhaps a lifter that down the road can be converted into a vertical spinner (Can you tell I like kinetic energy weapons?) later down the road when I'm more comfortable with how things work.
    I have to consider a similar premise for my Beetleweight vertical bar spinner for that "just in case" situation.
    Last edited by Ocracoke; 11th October 2018 at 22:00.
    Team Kaizen

    AW: Osu, Ikari, Ramu
    BW: Shu! (Build Thread)
    FW: The Honey Badger (Build Thread)
    MW: Kaizen (Build Thread)

  3. #13
    Maxamuslead's Avatar
    Roboteer

    Status
    Offline
    Name
    Mark Smith
    Robots
    "Blacksmith" (FW) in a bag in bits "Forge Master" (FW) battle worn "Forge Master II" (FW) in CAD
    Location
    Lincolnshire, Threekingham
    Posts
    426
    First things first get a simple bot made. Rambots are great starts but Ifou want something with a weapon lifters or axes are a good option as they are simple and can be done cheap

  4. #14
    mullinsj08's Avatar
    Roboteer

    Status
    Offline
    Name
    Josh
    Robots
    Little Spinner (FW) - In Progress
    Location
    Hampshire
    Posts
    6
    I haven't had time to design a whole new robot due to work commitments but I did get some help from my brother to re-design the top and bottom panels to be wider and not very slightly skewed apparently!

    45608331_296168684567893_1833844296864759808_o.png
    Petersfield Combat Robotics - https://www.facebook.com/PetersfieldCombatRobots/

    Little Spinner (FW) - Designing

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •