Register To Comment
Results 1 to 6 of 6

Thread: Any advice for a First Timer?

  1. #1
    ForeverCraig's Avatar
    Roboteer

    Status
    Offline
    Name
    Craig
    Location
    Harleston, Norfolk
    Posts
    2
    hello all, first of all Hi, my name is Craig, i'm new to building robots and I am interested in building my First over the winter

    The Idea is to build a Featherweight Control bot - and wondered if any of you experienced Builders have any advice on how best to build one is - what is the easiest way and best place to get electronic parts, materials, etc.

    I do have a few ideas on materials I want to build it out of - mainly a HDPE base - but any helpful suggestions for alternatives would be greatly appreciated.

    Thank you for reading this and I hope this leads to a successful build

  2. #2
    Ocracoke's Avatar
    Team Kaizen

    Status
    Offline
    Name
    Michael
    Robots
    AW: Osu, Ikari, Ramu / BW: Shu!, Mita / FW: The Honey Badger / MW: Kaizen, ???
    Location
    Somewhere on the Wirral
    Posts
    780
    Hey there, welcome to the forum!

    HDPE is a good place to start, easy to work with, especially with hand tools. I'd read up on the build diaries here to see what works and what doesn't work to give an idea as to what is being used by the roboteers around here at the moment.

    As for places to source stuff, I find HobbyKing.com, Technobots.com and RobotShop.com the places I tend to go to get my bits and pieces though of course, there are others I am sure can recommend (along, of course, with parts being sold on here from time to time). As far as the easiest way to build a robot, plan your build, make sketches, sleep on the design, review and adjust until happy and then build is the way I do mine these days.

    Hope this helps!
    Team Kaizen

    AW: Osu, Ikari, Ramu
    BW: Shu! (Build Thread)
    FW: The Honey Badger (Build Thread)
    MW: Kaizen (Build Thread)

  3. #3
    ForeverCraig's Avatar
    Roboteer

    Status
    Offline
    Name
    Craig
    Location
    Harleston, Norfolk
    Posts
    2
    thank you for the feedback - i'm also watching some old Robot Wars (Original era) for ideas and thinking Lexan could be useful too as a Building material for it

    As for the pointers on the design I've been working on Drawings and sketches for the weaponry - Its planned to be Under mounted Steel spider with chains at the end - mainly because I love old style horror books like Stephen Kings, Edgar Allen Poe and H.P. Lovecraft - the arms would hopefully entangle (if that is legal in battle) and Imobilise without causing too much damage as I know how much Robots cost to build and repairing is costly (Carbide and Hypno Disc come to mind and the devastation they caused so I'm not a big fan of that type of bot) plus I respect all roboteers and their creations so I wouldn't wanna destory such creativity (I might be the first Pacifist to enter Robot Combat )

    thank you yet again for the feedback and I hope to update how the build goes

  4. #4
    Lexan and macrolon are brandnames of polycarbonate. The stuff is harder but more brittle than HPDE.
    The only reason I would use polycarbonate is the see trough capability.
    For stiff structural parts, aluminium, hardox or titanium.

  5. #5
    Ocracoke's Avatar
    Team Kaizen

    Status
    Offline
    Name
    Michael
    Robots
    AW: Osu, Ikari, Ramu / BW: Shu!, Mita / FW: The Honey Badger / MW: Kaizen, ???
    Location
    Somewhere on the Wirral
    Posts
    780
    I use polycarbonate on Kaizen on its shell panels (4mm thick box section steel for the structure) and on the front wedge (20mm at the leading edge to the floor). Held out fine in the recent Middleweight championships, even when hurling itself against a vertical spinner at one stage.

    Its planned to be Under mounted Steel spider with chains at the end
    Sounds unusual, I can't quite visualise that, got a drawing you can show?
    Team Kaizen

    AW: Osu, Ikari, Ramu
    BW: Shu! (Build Thread)
    FW: The Honey Badger (Build Thread)
    MW: Kaizen (Build Thread)

  6. #6
    willcaddy's Avatar
    Member

    Status
    Offline
    Name
    William Cadwallader
    Robots
    Caractacus (In Development xD)
    Location
    Worcestershire
    Posts
    56
    Hello there,

    Really nice to see a new face xD I'm not an expert like some people on the forum but I have been making a build log of videos about exactly what i have done step by step.

    Not intentionally trying to whore myself out ha ha just trying to give you a good starting point

    Here is the link to the playlist

    and Here is the link to my own forum post

    Which has some great advice from the other members of the forum who are all wonderful! xD

    All the best!

    Will
    Last edited by willcaddy; 9th October 2018 at 15:20. Reason: It imported the dam videos lol

Register To Comment

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •