Register To Comment
Results 1 to 5 of 5

Thread: Clearout! Ampflow motors, dx8 transmitter, rams

  1. #1
    Clearout! selling off some robot parts to make some money, and some space, for other robot parts.
    Uk mainland delivery included unless stated.
    Collection is from UB4 hayes

    SOLD!! AWAITING PAYMENT
    2x Ampflow A28-400
    20180104_172955.jpg20180104_173017.jpg20180104_173030.jpg20180104_173036.jpg
    specs here
    £500 for the pair
    Bought second hand and never used
    Brush holder casing is cracked, and shaft keyway is slightly damaged. This should not affect performance...


    2x Ampflow E30-400 (24v)
    20180104_174212.jpg20180104_174221.jpg
    specs here
    UK supplier here
    £160 for the pair
    I bought these from Rapid electronics because I needed gearboxes quickly! these were removed and never used.


    like a bunch of fans
    20180104_180047.jpg
    £5 for 2 fans...
    Everytime I get an ampflow motor with these fans on, the first thing I do is remove it and put it in my pile of ampflow motor fans.
    I have like 20 of the things.
    I know somepeople prefer to leave them on the motor, so if you would like some spares hmuuuuppp


    Makita drill motor
    20180104_180116.jpg20180104_180235.jpg
    £15 for the mystery bag!
    I took apart a drill and threw out the housing because... im not really sure... I think I wanted the chuck? anyway, the contents of the drill went into this bag.
    it was the type with the orange battery with the stem, not the new slidey one if that helps.


    Ampflow E30-150 24v
    20180104_182201.jpg20180104_182216.jpg
    specs here
    uk supplier
    £50 each (£140 for the 3)
    Brand new.



    I needed more gearboxes...

    Bearing housing
    20180104_194011.jpg20180104_194035.jpg
    £15 for the 4
    aluminium bearing housings for 608-z bearings (skateboard, 8mm shaft)
    made to dwg attached


    massive low pressure cylinders.
    for robots, or maybe you want to build your own arena? or lift a car or something?
    20180104_204324.jpg20180104_204331.jpg20180104_204346.jpg

    20180104_204413.jpg20180104_204418.jpg20180104_204424.jpg
    part numbers are there for cad and weights etc.. I think from memory they were like 20kg or something.
    I have 2 of each. open to offers
    Attached Images Attached Images
    Last edited by TomcoDesigns; 8th January 2018 at 23:29. Reason: added words! because I wasnt going to spend another hour adding everything then it fail adn i dont know where the autosaves g

  2. #2
    Capture.JPG
    dwg from bearing block...


    Spektrum DX8
    20180105_163624.jpg20180105_163053.jpg20180105_163541.jpg
    £130
    very good condition, No charger! a new one is like £20 on ebay, or just do what I did, charge it once at an event, and the thing never seems to run out of charge. I have also included a receiver



    Hoverboard
    20180105_155539.jpg20180105_155601.jpg
    £35
    This was given to me to repair. The wheel shaft clamps had come loose, and the motor wires had twisted around and shorted the motherboard. The repair was as much as replacement. everything other than the board should be good.
    Last edited by TomcoDesigns; 6th January 2018 at 16:53.

  3. #3
    E series ampflows sold!!

  4. #4
    spektrum dx8 sold

  5. #5
    ok cheers

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •