Register To Comment
Results 1 to 4 of 4

Thread: Gauge of Wire

  1. #1
    I'm wondering what gauge of wire should I get? I'm building a lightweight 4 wheel wedge, using the DeWut motors from Charles Guan as well as 2 ragebridge2 speed controllers.

  2. #2
    Member

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    242
    I am using 10AWG, its rated to 30 amp continuous so suitable for my build / fuse ratings, and its what is fitted on my LIPO.

    I did read about this on the rules and regs and i feel it fits within them.
    The 10AWG is also the rated wire fitted to the Turnigy TZ85A esc (I BELIEVE??).

    If I am also in the wrong, please let me know
    Last edited by Roboteernat; 15th November 2017 at 15:11.

  3. #3
    Ocracoke's Avatar
    Team Kaizen

    Status
    Online
    Name
    Michael
    Robots
    AW: Osu, Ikari, Ramu / BW: Shu! / FW: The Honey Badger / MW: Kaizen (Building)
    Location
    Somewhere on the Wirral
    Posts
    686
    Fairly sure, looking at a picture of the TZ85A, they come with 12AWG, not 10.
    Team Kaizen

    AW: Osu, Ikari, Ramu
    BW: Shu! (Build Thread)
    FW: The Honey Badger (Build Thread)
    MW: Kaizen (Build Thread)

  4. #4
    Member

    Status
    Offline
    Name
    Nat
    Robots
    Wanna Choppa (Axe FW) Short Circuit (HW RWs6) Locking Wheel Nuts (AW) DELLapidated bANTtery (AW) Lo
    Location
    Eastleigh, Hampshire
    Posts
    242
    Dont have it to hand,. i may be wrong

    Looks like they are 12...
    https://hobbyking.com/en_us/turnigy-...___store=en_us
    Last edited by Roboteernat; 15th November 2017 at 15:12.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •