Register To Comment
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: Wanted: Featherweight bot

  1. #11
    Roboteer

    Status
    Offline
    Name
    Lostdreamer
    Posts
    11
    Post Thanks / Like
    The concept for the heavy i'm working towards is to build an axebot into an HGV wheel rim trying to design/build for durability rather than out-and-out firepower. Lots of bots don't seem to finish fights so i'm hoping logic of 'to finish first one must first finish' would make me fairly competitive.

    There is plenty of prior art out there, so I know it can be done.
    The wheel rim is a significant weight penalty and a packaging nightmare, but hopefully it makes the robot chassis/armour a service item that can be replaced between matches if needed.

    What I would like to explore with the feather is:
    Getting used to building/working with that packaging constraint. I'll probably use a mini wheel or something as a body.
    Getting used to working with HDPE. I havn't done much work with it before. It doesn't look too hard to work, but it's quite abrasion resistant which could be a problem and it isn't really on speaking terms with adhesives.
    Finding out what breaks and why so I can design against it. I assume this is a big part of the sport, but that's kinda one of the reasons for being curious if someone had something suitable in their shed. The main thing I want to learn with the feather isn't actually the design/construction (a lot of which changes when I upscale it and add an axe anyhow) it's a much more detailed knowledge of what happens during matches and how to go about damage avoidance/limitation.

    Books are on order - how did I miss the fact there was already a haynes manual!?! Of course there is, there is a haynes manual for everything!

    Next stop ebay for some parts.

  2. #12
    mrsam's Avatar
    Member

    Status
    Offline
    Name
    Sam Price
    Robots
    Hatchet FW (still running) Hatchet 2FW (in progress) Lynx BW(in progress)
    Posts
    868
    Post Thanks / Like
    I have an axe feather that for a good enough offer I’d consider selling, there’s a for sale thread up and tonnes of videos of it on YouTube if you want to do some research

  3. #13
    Roboteer

    Status
    Offline
    Name
    Lostdreamer
    Posts
    11
    Post Thanks / Like
    Quote Originally Posted by mrsam View Post
    I have an axe feather that for a good enough offer I’d consider selling, there’s a for sale thread up and tonnes of videos of it on YouTube if you want to do some research
    Oooh! Very shiny.

    But, sadly, not quite what I am looking for as an entry point.

    I'm much more interested in the driveline and control hardware than the weapon at this stage.

    As I understand it, rambots are quite viable at featherweight (I could be mistaken) so weaponry is a later problem.
    Possibly a much later problem that can weight until I start the full heavyweight build.

    I'm thinking of something cheap and cheerful that I can mess around with. I want to mess around with combat robots damnit! It'll be back to the drawing board after the first few fights anyway so I may as well shortcut the process slightly by starting with someone else's £300 B&Q special.

    ...but there is nothing stopping me knocking up a £300 B&Q special myself and people are doing a reasonable job of convincing me that is the way forward.

  4. #14
    Ocracoke's Avatar
    Team Kaizen

    Status
    Offline
    Name
    Michael
    Robots
    Osu - AW / Shu! (Building) - BW / The Honey Badger - FW / Kaizen (Building) - HW
    Location
    Somewhere on the Wirral
    Posts
    187
    Post Thanks / Like
    As I say, it is the whole "building it yourself" process that is the reward for the investment plus you get to intimately know how your robot works. The drive electronics/mechanics are fairly simple to understand once you know the language that comes with it.

    My original robot, The Honey Badger 1.0 used little more than a wooden garden planter from B&Q frame as a chassis, a aluminium lampshade as a shell, 2x eBay motors, 2x speed controllers from RC cars, 2x aeroplane model wheels, a castor ball and a remote control transmitter (and that was the most expensive single part of the entire thing).

    If you ignore the spinning flail that came with it, it came to roughly £180 and that was with a special tank RC transmitter that was £90 because I didn't understand what mixing was. Now it didn't work very well and only went through one fight before being absolutely flattened but the point is that I learnt oh so much from doing it myself.

    Refitting another robot with your own electronics isn't a bad idea in of itself and you really wanted to, you could just remove the axe... (controversial I know, I'd keep it in a heartbeat).
    Last edited by Ocracoke; 3rd November 2017 at 13:35.
    Team Kaizen

    AW - Osu
    BW - Shu! (Build Thread)
    FW - The Honey Badger (Build Thread)
    HW - Kaizen (Build Thread)

  5. #15
    Roboteer

    Status
    Offline
    Name
    Andy taylor
    Posts
    7
    Post Thanks / Like
    Hi sam. Did you get my message? You gave me a price and i replied

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •