Register To Comment
Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Calling all CAD pros - little help needed for a modified NERF gun

  1. #1

  2. #2
    I can do it but don't have the time atm. Will be free at the start of next month.

  3. #3
    Are the original files publicly available, I could have a go with solid works Maya plus others

  4. #4
    Can probably have a go at this tomorrow morning if you link the thingiverse page and the motor you are using.

  5. #5
    Cheers guys.

    This is the link to the motor cage:
    https://www.thingiverse.com/thing:2561650 (you'll see there's cut outs for the motor wires already that'll need to line up)

    and these are the motors I'm using: http://image.helipal.com/emax-rs1306...-cw-big003.jpg

    Would also be great if someone could reduce the size/ simplify the flywheel file as I can probably manage to alter that myself in tinkercad.

    Cheers!

    Dan
    Last edited by Danjr1; 8th October 2017 at 14:10.

  6. #6

  7. #7
    Oh sorry I didn't realize nobody had actually got back to you. Will do it tonight when I get back from work.

  8. #8

  9. #9
    I managed to remove the holes, but can't figure out how to make new ones. STL is such a shitty format for models, why don't people just print step files...

    You can just print the part out and drill the holes yourself. Using the motor plate as a guide.

    https://drive.google.com/open?id=0Bw...El2ZGtCejMwVXM

  10. #10

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •