Register To Comment
Results 1 to 10 of 190

Thread: 300A VESC in the works, feature suggestions wanted

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #11
    I have now made up one of the logic boards and started testing it out. Should hopefully get it connected to the power board tonight!

    As you might have guessed this is going to be a two part ESC, but with a difference. The logic board is actually going to be on a longish cable ~30cm so that you can keep all your logic boards, receiver, etc in the same place, reducing cable clutter. It also makes the power boards smaller and therefore it is easier to fit the controller into a bot.
    They are connected by a microfit cable which I can supply in 150mm or 300mm.
    They look like this: 2017-08-30 17_50_35-45132-0810 Molex _ Mouser United Kingdom.pngAs they are locking they should stay on through big hits just fine.
    Last edited by TechAUmNu; 30th August 2017 at 20:38.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •