Register To Comment
Results 1 to 4 of 4

Thread: Drilling hard steels

  1. #1
    Member

    Status
    Offline
    Name
    Tim G.
    Posts
    59
    Post Thanks / Like
    Right, I have just collected my steel that I will be using to make a hydraulic jaw thingy.

    It is EN24T, which I am told is high strength steel. I will be putting lots of compression and tension through the stuff so here's hoping it will be strong enough.

    The question is; How do I drill it as I want to make about 20mm holes through to have spindles/axals for the press thingy.

    The internet has suggested using masonry bits sharpened if they wre tungsten tipped.

    Will this work?

  2. #2
    Member

    Status
    Offline
    Name
    Matt Lampitt
    Posts
    39
    Post Thanks / Like
    What diameter hole you need?
    edit...
    just seen..
    have the perfect thing... 2 secs

    edit 2

    this bit... Tungsten Carbide Tipped 20mm hole saw.
    https://www.ebay.co.uk/itm/152133521208

    May need to pilot it with the 5.5mm bosh:
    http://www.powertoolworld.co.uk/bosc...FdYYGwod9SADEA


    drilled like this to keep permanently lubed and cool.


    drill slow
    Last edited by MattLampitt; 12th May 2017 at 20:22.

  3. #3
    Member

    Status
    Offline
    Name
    Nat
    Robots
    Short Circuit (HW RWs6) DELLapidated bANTtery (AW) LowMoe (AW) Several unnamed ants
    Location
    Eastleigh, Hampshire
    Posts
    147
    Post Thanks / Like
    Quote Originally Posted by MattLampitt View Post


    drilled like this to keep permanently lubed and cool.


    drill slow
    Oh dear god! Hold the drill steady! Who else cringed watching the glass get scratched by a wandering drill?

    Remember when drilling anything it's about speeds, when turning on lathe or milling its speeds and feeds.

    Also use some cutting fluid as apposed to water with metal, as the oils lubricate the drill and stop the metal sticking to the tips of the drill flutes.
    Last edited by Roboteernat; 15th May 2017 at 10:11.

  4. #4
    Member

    Status
    Offline
    Name
    Matt Lampitt
    Posts
    39
    Post Thanks / Like
    Oh yeah... I forgot to mention use oil and put in pillar drill instead hahahah .

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •