Register To Comment
Results 1 to 6 of 6

Thread: Clarification required on walker rule

  1. #1
    Member

    Status
    Offline
    Name
    Igor
    Posts
    3
    Post Thanks / Like
    Does the rotating crank in a Jansen linkage count as a "rolling mechanism" under FRA rules?
    Last edited by Igor; 16th March 2017 at 20:32.

  2. #2
    Member

    Status
    Offline
    Name
    William Turner
    Posts
    18
    Post Thanks / Like
    I would have assume not as they only have 1 degree of freedom. The rules stipulate 2 degrees of freedom i.e. 2 independent joints. The linkaqges in the Jansen linkage control it to a single degree. That said I'm sure you could get close to the line once, e.g. a very insignificant second joint for a dummy 'ankle', but thats not really in the spirit of it.

  3. #3
    Member

    Status
    Offline
    Name
    Igor
    Posts
    3
    Post Thanks / Like
    The plan is to mount the motors on drive 'pods' along with the legs rather than on the body of the bot. The pods can then be twisted (motors as well) like the front wheels of a car. This will allow the legs to yaw as well as pitch giving a second degree of freedom.
    What worries me is the latest Robot Wars rules describes robots with rolling and sliding mechanisms as shufflers but have a shuffler allowance. SPARC rules prevent unrestricted rotary motors altogether.

    Although the FRA rules are clear walkers have linear actuators and shufflers have cams, crank based drives aren't clear.

    At first sight, my design appears to qualify as a walker under FRA rules (moveable legs, 2 DOF) but might fall foul of the rolling and sliding rule. I thought the rolling rule was there to prevent drillzilla style cam based drives qualifying as walkers but I'm beginning to wonder if it's broader than that and includes crank based drives as well.

    Also, would twisting count as sliding?

    I'm aiming for beetleweight as a proof of concept.
    Last edited by Igor; 31st March 2017 at 20:25.

  4. #4
    typhoon_driver's Avatar
    Member

    Status
    Offline
    Name
    Gary Cairns
    Robots
    Hornet 2 - retired Boner - retired Smidsy - Sold 540 - Sold PP3D - Active
    Location
    Aberdeenshire
    Posts
    4,341
    Post Thanks / Like
    No point asking here. Email the robot wars team at robotwars@mentorn.tv and ask

  5. #5
    Member

    Status
    Offline
    Name
    Igor
    Posts
    3
    Post Thanks / Like
    Thanks, I've sent them an email.

    I might just build my bot anyway as I'm curious to see if it would work.

  6. #6
    TomcoDesigns's Avatar
    Roboteer

    Status
    Offline
    Name
    Tom Lloyd
    Robots
    Andron4000 (in progress), BuckytheRobot (in progress)
    Location
    Hayes, midx
    Posts
    11
    Post Thanks / Like
    hello,

    Any update on this?

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •