Register To Comment
Results 1 to 4 of 4

Thread: Need Hardox 500 20mm

  1. #1

  2. #2
    Have you tried http://www.wearpartsuk.co.uk/ ?
    Both Carbide and PP3D got their weapon bars/discs from them at 25mm thickness so I imagine they'd have 20mm, although maybe only in 450 grade.

  3. #3
    When all else fails go to the source
    http://www.ssab.co.uk/products/brands/hardox
    Have had to purchase from them when there wasn't anything immediately available on ebay etc, message them they were quite accomodating.
    You could also look for Abro which is almost the same and available in several hardnesses
    we us sales@westyorkssteel.com
    These guys are my local suppliers and really know there stuff. There are also other brands
    e.g. Raex
    http://lakelandsteel.uk/metal-sheet-...-than-400-450/

    Just a thought, hardox is the goto weapon materiel for many roboteers not because it is the best steel for the job, rather because it is widely available. If you look at the characteristics chart on the ssab site you'll see that while it has good surface hardness it is designed to be bent as it is 'wear plate' for abrasive situations. Unfortunately most steels that are better suited to our requirements require a heat treatment process after machining which adds another level of cost. Have a look for a local specialist steel supplier and have a chat with them they may be able supply you with an alternative solution.

    For your titanium I've bought from Metall Nord in Hamburg before

    Metall-Hamburg@web.de
    +49 17648614785

    They were reliable and quick. They advertise on ebay but you can also order specific sizes from them at similar prices.

  4. #4

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •