As the title says, I'm looking for a supply for high performance compressors for a possible HW project,
on the feather I'm using these.
IMG_2122.jpg
they work very well and are cheap but I would probably need 4 or 5 of them to get the capacity I need!
any ideas?
thanks
Craig
What jumps to mind would be PTO driven compressors from a tractor. Usually fairly small units that bolt onto a tractor and run off the PTO shaft. These will run at around 540rpm give or take and can be found easily enough second hand or new on ebay / gumtree. You will of course have to run them off a suitable motor with gearing but I'm sure that would easy enough to rig up.
Some specs taken quickly from a unit on ebay - Twin Cylinder - Working Pressure 8bar (116psi) x 90 lt/min (3.2cfm)
I forgot to reply to this!
Thanks Gary, I think that might work I will be looking into one of them some time soon
Posting Permissions
Reply With Quote
Bookmarks