Register To Comment
Page 1 of 8 123 ... LastLast
Results 1 to 10 of 79

Thread: Team Health & Safety - First Time Builder

  1. #1
    Zenith's Avatar
    Roboteer

    Status
    Offline
    Name
    Greg Cathalina
    Robots
    This Is Not A Drill (BW)
    Location
    The Netherlands
    Posts
    46
    Post Thanks / Like
    Hi everyone!

    At long last I'm giving this a go. Built myself the Viper kit with a lifter to see how I'd do (AND BY GOD IT WORKS), and now I'm hooked.

    Time to kick it up a notch, and join the Beetleweights with my own entry built from scratch. I aim to do most of it myself - construction, wiring, the lot. Let's see how far I get - the goal is first and foremost to have a laugh, but I aim to eventually make it to the Beetleweight champs at some point (flying the flag of the Netherlands into battle!).

    Any tips on materials to use (or not to use) are welcome. I'm starting out simple, so I've set my sights on a 2WD drive with the 10A Botbitz ESCs, and an HDPE construction with a nice wedge in front. What lies beyond that we'll see later - rest assured, you'll get plenty of opportunities to point and laugh!

    Questions I have so far:

    Firstly, drive motors - I've already found plenty suitable things by scavenging through the build diaries here, but what are the main things to look out for? Preferred size, weight, power, torque? How to mount them into a plastic chassis?

    Goggles on,

    Greg

    =

    Thread Overview:


    Event Report: 2017 Beetleweight European Championships

    Team Facebook can be found at http://www.facebook.com/teamhealthnsafety
    Last edited by Zenith; 10th September 2017 at 07:45.

  2. #2
    Andy's Avatar
    Member

    Status
    Offline
    Name
    Andy Russell
    Robots
    Pendulum, Telekinesis, Push 'n' Shove, Ion
    Location
    Birmingham
    Posts
    256
    Post Thanks / Like
    For drive motors most people use these or a similar variant

    http://ranglebox.com/product/1000rpm-gear-motor/

    They give great speed and torque for beetleweight robots and are quite easy to use, for mounting them they have two holes on the front for face mounting, in my beetle theyre bolted to the sides of the chassis then the wheels are on the outside of the main chassis, but there are other ways you could do it.

    Goodluck!

  3. #3
    Zenith's Avatar
    Roboteer

    Status
    Offline
    Name
    Greg Cathalina
    Robots
    This Is Not A Drill (BW)
    Location
    The Netherlands
    Posts
    46
    Post Thanks / Like
    Thanks! I spotted some useful motors on Ebay that were mentioned in build threads, so I'm looking into those too. Placed the first order for some parts yesterday, and I'm quite looking forward to getting all of the internals together to get a grip on dimensions. I'm not really a guy for doing it in on a computer, I'd much rather do it hands on. Cardboard Aided Design all the way!

    What are some of the best solutions when it comes to wheels? Already managed to find some Fingertech wheels online, but which kind is more commonly used?

  4. #4
    Roboteer

    Status
    Offline
    Name
    David
    Location
    Blackpool
    Posts
    1,651
    Post Thanks / Like
    I use pololu but fingertech are the most popular.

  5. #5
    Shakey's Avatar
    Roboteer

    Status
    Offline
    Name
    Alex
    Robots
    Far, far too many (100+).
    Location
    Fleet, UK
    Posts
    400
    Post Thanks / Like
    Banebots are the best choice in my eyes for beetle wheels.

  6. #6
    Eventorizon's Avatar
    Member

    Status
    Offline
    Name
    Alex
    Robots
    Conker 3: Insomnia 58 Champion - Binky: Still Alive
    Location
    Yorkshire
    Posts
    1,693
    Post Thanks / Like
    Fingertech are so called because you need bionic fingers to get them on... its a really bad system. The wheels are light but you need 4 hands to put 1 wheel on.
    I'd go Banebots if you can, or look at getting some wheels 3D printed. You can also but some press on wheels from various places like Ebay and Technobots.

  7. #7
    maddox10's Avatar
    Member

    Status
    Offline
    Posts
    2,294
    Post Thanks / Like
    Zenith, PM me. You can do better...

  8. #8
    Zenith's Avatar
    Roboteer

    Status
    Offline
    Name
    Greg Cathalina
    Robots
    This Is Not A Drill (BW)
    Location
    The Netherlands
    Posts
    46
    Post Thanks / Like
    Thanks for the input everyone! I'm also looking into actual RC wheels - seems to be a viable option too from what I've seen.

    Ofcourse, it's also dependent on which ones are easiest attainable down here. Those import charges can be a true pain.

  9. #9
    Niels - Team K.a.L.M.'s Avatar
    Member

    Status
    Offline
    Name
    Niels van der Berg
    Robots
    bulls it (FW), Chop suey (BW)
    Location
    Wormer, Holland
    Posts
    413
    Post Thanks / Like
    As much as I love some competition here in Holland. Zenith's stepping up to the beetle plate means my machine is no longer dutch champ by default... Now I can finally earn some bragging rights, or lose them completely with a smile on my face.

  10. #10
    maddox10's Avatar
    Member

    Status
    Offline
    Posts
    2,294
    Post Thanks / Like
    Zenith did PM me...

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •