Register To Comment
Page 21 of 46 FirstFirst ... 11192021222331 ... LastLast
Results 201 to 210 of 459

Thread: Team Coolspeedbot: first feather weight robot

  1. #201
    A slightly shorter length Wolf-E? Shedding 4cm in length and moving internals back a bit.




  2. #202
    So after a late night and lots of maths I've got the current calculated weight of Wolf-E.

    The weight is looking to be about 8.8kg leaving 4.8kg to play with. Currently its size will be 25.5cm x 38cm x 10cm.

    The previous weight and size was 9.8kg with 3.8kg spare. The size was 29.5cm x 38cm x 10cm.

  3. #203
    And a stand alone render


  4. #204
    Ok time for another question, so as you may have seen Wolf-E's wedge isn't flush with the ground as the side panels are. And was wondering the possibility of making the wedge flush by making the panel long and angle grinding the excess off, like in this picture:

    Screen Shot 2017-07-21 at 19.16.20.png

    I'll have to add a bevel to the wedge to stop it snagging the edges of arena floor panels anyway but I though I ask people more experienced with Hardox.

  5. #205

  6. #206
    Quote Originally Posted by daveimi View Post
    Make the panel too long and grind off till flush.
    Oh good

  7. #207

  8. #208
    Get yourself a solid back door step, works for dave!

  9. #209
    Quote Originally Posted by Albear View Post
    Get yourself a solid back door step, works for dave!
    What would that be of any use?

  10. #210
    because that's what he does all his engineering on Although, he's built more successful robots than me to be fair

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •