[FW] Tracked 4WD Lifter: Aegis

[R9000]

Daveimi:
No. Way back when I was searching for linacs, I couldn't find one that gave enough force and moved fast enough. So I bought the one I have now, which can lift about 20 kg, but is slow, and then I built the robot around that. The distances between the end of the arm and the brackets I had cut are all set to fit the linac I have.

Maddox:
I was using this to calculate DP: http://www.robotpark.com/academy/LR/..._ROBOTPARK.png
I'll try measuring again, honestly the most important piece of information there is that DP 44 doesn't exist. But if I'm working out the pitch correctly, I don't understand why I seem confused to you. A 'yes' or a 'no' to that would've been most helpful. :P

Edit-
I measure approximately 29mm/50 = 0.6 metric module (rounding here) for the gear. This sounds more likely. I suppose I'll try buying a cheap 0.6 mod gear to see if it meshes, just to make sure.