Register To Comment
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Wheels and motors

  1. #1

  2. #2

  3. #3
    Hi, a lot of people use fingertech snap hubs and wheels

    http://www.fingertechrobotics.com/pr...d=ft-snap-hubs

    You will have to root through some of the menus as the stuff is American and so a lot of the screws and circlip pliers are in American sizes. I got fed up with it so I use these wheels, hubs, motors and brackets.

    http://www.technobotsonline.com/polo...lack-pair.html

    http://www.technobotsonline.com/polo...pack-of-2.html

    http://www.ebay.co.uk/itm/2-x-12V-DC...MkWBZJdrTnt8Mw

    https://robotbits.com/robot-parts/mo...cket-pair.html

    Word of warning...DO NOT USE THE STANDARD GRUB SCREWS!!
    Go to Maplin and buy a £10 assortment box of M3 and M4 screws that you can tighten properly. Then screw your motors to the brackets, wheels to the hubs, hub/wheel tightened onto shaft then tie wrap the whole lot down to your base plate. This is a crude way of doing it, but it's quick n easy and got me nearly to the final of the UK Champs. See below my weird robot, specifically the motors. You will need to solder wires onto the terminals.


  4. #4

  5. #5

  6. #6

  7. #7

  8. #8

  9. #9

  10. #10

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •