Register To Comment
Results 1 to 10 of 10

Thread: 4mm hardox offcut

  1. #1
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Spur 4 (FW), Titus (HW) , Team Nuts
    Posts
    517
    Post Thanks / Like
    After a small piece of 4mm hardox (6mm at a push), around 300mm x 200mm

    If anyone has a piece I could buy or know of a supplier selling offcuts around this size would be great

    Chris

  2. #2
    Ds1638
    Guest
    Hi Chris,


    i will have some RAEX 400 off cuts late next week if that helps ?


    cheers
    dave

  3. #3
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Spur 4 (FW), Titus (HW) , Team Nuts
    Posts
    517
    Post Thanks / Like
    Sounds good. Let me know and we can work something out

  4. #4
    Ds1638
    Guest
    Hi Chris,

    i am at last going to order the Raex 400 tommorow, is it 300 x 200 panel you need ?
    Last edited by Ds1638; 17th January 2016 at 18:04. Reason: Spelling

  5. #5
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Spur 4 (FW), Titus (HW) , Team Nuts
    Posts
    517
    Post Thanks / Like
    That would be great but can also work with the same area but in a couple of smaller panels (300 X 150mm X 4mm)

  6. #6
    jay's Avatar
    Member

    Status
    Offline
    Name
    jj Kilgallon
    Robots
    HW - "Hard"-Ox (building)
    Location
    Grantham, Lincolnshire
    Posts
    80
    Post Thanks / Like
    Did you get any hardox mate?

  7. #7
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Spur 4 (FW), Titus (HW) , Team Nuts
    Posts
    517
    Post Thanks / Like
    Seeing how Dave gets on with off cuts from ACE

  8. #8
    jay's Avatar
    Member

    Status
    Offline
    Name
    jj Kilgallon
    Robots
    HW - "Hard"-Ox (building)
    Location
    Grantham, Lincolnshire
    Posts
    80
    Post Thanks / Like
    No worries, if you come un-stuck ive got plenty, from 3mm upwards

  9. #9
    Member

    Status
    Offline
    Name
    Chris
    Robots
    Spur 4 (FW), Titus (HW) , Team Nuts
    Posts
    517
    Post Thanks / Like
    Great. Will let you know. I have lots of 3.2mm but looking to beef up some areas with 4-6 MM. range

  10. #10
    Ds1638
    Guest
    Hi Chris, the Hardox came today, I will try and cut a section off for you on Sunday, can you pm me your details for postage.

    Cheers
    dave

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •