Register To Comment
Page 8 of 8 FirstFirst ... 678
Results 71 to 76 of 76

Thread: Tashic's Robots

  1. #71
    Member

    Status
    Offline
    Name
    Gabriele Mereu
    Posts
    42
    Post Thanks / Like
    Little drive test:


    Servos and microswitches with 2 12 cell NiCd packs, one for each side.

  2. #72
    Member

    Status
    Offline
    Name
    Gabriele Mereu
    Posts
    42
    Post Thanks / Like
    Continued the build, by adding front and side armour:

    I still need to add bolts.

    Now the problem is that at this stage I'm 1kg short of the weight limit, and I still need a top cover and electronics.
    So when you fing that your robot is overweight, or is going to be over weight, what do you do?
    Also how people make their drill motor mounts and how much they weight?
    Attached Images Attached Images

  3. #73
    Member

    Status
    Offline
    Name
    Gabriele Mereu
    Posts
    42
    Post Thanks / Like
    Moar progress, about time...



    Other than the obvious top cover (10mm HDPE), I replaced the base with 3mm aluminium, and the mounts are now 10mm HDPE too, so now I have 2Kg for the electronics and battery, plus other things to remove for the axe, but that's for later.

    Tz85's from hobbyking, and I'm thinking of a 5s 4000mAh lipo battery, 4s is probably not enough to self right.
    I'll then need to build a box for said battery and ESCs.

    As the motors are rated only for 12V, can I just reduce the travel on my TX to save them?
    Attached Images Attached Images

  4. #74
    Member

    Status
    Offline
    Posts
    2,139
    Post Thanks / Like
    You're a really talented builder. That's fucking ace!

  5. #75
    overkill's Avatar
    Member

    Status
    Offline
    Name
    Nick Martin
    Robots
    Mr Mangle - Australian 2015 Featherweight Champion 2016 UK Gladiator Shiny Scissorhands Decimator
    Location
    Sydney Australia
    Posts
    815
    Post Thanks / Like
    You can definitely rate limit your radio to reduce motor heating but with 12V motors running on 14.8V, its probably not necessary. A 4AH battery seems way too large for a non-spinner; it doesn't hurt to have extra capacity but you can save weight & money with a smaller pack. Without knowing much about your bot, I'd guess a 2.5AH pack is probably enough.

  6. #76
    Member

    Status
    Offline
    Name
    Gabriele Mereu
    Posts
    42
    Post Thanks / Like
    The battery is going to be 5s, so 18.5V, and apparently I keep overestimating how much capacity the robot needs.

    Also Harry, the robot isn't precisely built, pretty much everything is wonky and not straight if you look carefully, but it's still functional and I like it overall .
    Last edited by Tashic; 19th November 2015 at 22:04.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •