Register To Comment
Page 47 of 47 FirstFirst ... 37454647
Results 461 to 463 of 463

Thread: Skipdiving Robotics

  1. #461
    Danny B's Avatar
    Roboteer

    Status
    Offline
    Name
    Daniel Booth
    Robots
    Mecha Sombra (FW, retired) Ferrovore (FW, active) Tantibus (FW, in build)
    Location
    Leeds
    Posts
    157
    Post Thanks / Like
    Looking good! Following on from Alex's suggestion, I'd like to suggest the name 'Silver Bullet'.

  2. #462
    Ocracoke's Avatar
    Team Kaizen

    Status
    Offline
    Name
    Michael
    Robots
    Osu - AW / Shu! (Building) - BW / The Honey Badger - FW / Kaizen (Building) - HW
    Location
    Somewhere on the Wirral
    Posts
    189
    Post Thanks / Like
    Looking back at page 44 of the thread...

    Erm it's just a ram bot without a wedge to see if it glances off spinners. Which is really what's built to fight. And I'm giving these a try randomly

    https://www.technobotsonline.com/919...otor-50-1.html

    with skate wheel hub adapters and wheels. Whole thing was like £30 or so delivered and just screws together stress free.
    ...then I am convinced that at least two of those 50:1 will move a basic wedge/rambot with the design you have and the material being used (I have one of these motors for my Beetleweight Shu! lifter motor).

    If you wanted a bit more power in it though, either upping the voltage to near as 15v as possible (since the specifications suggest they'll go that high) or using four of them would be ideal in a one per 1 corner arrangement - they are light enough to have four in that design and still have a lot of weight allowance left over for armour and/or weaponry.
    Last edited by Ocracoke; 29th October 2017 at 12:40.
    Team Kaizen

    AW - Osu
    BW - Shu! (Build Thread)
    FW - The Honey Badger (Build Thread)
    HW - Kaizen (Build Thread)

  3. #463
    Roboteer

    Status
    Offline
    Name
    David
    Location
    Blackpool
    Posts
    1,666
    Post Thanks / Like
    Yeah I'm going to try them and see what they're like. I'm not quite sure what to expect. They don't have as much power as drill motors but then I never got drills running right anyway. If these don't work going to get some ampflows or build a heavyweight lol. Now I know I can cut accurately I want to give a heavy another go.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •