4 Attachment(s)
Disassembly of Argos 14.4v
Hey all,
Decided to untangle and disassemble the Argos 14.4V drills I used in my demo bot.
In making the demo bot, I removed the battery and unscrewed the few screws holding the two sides of the case together.
Attachment 7699Attachment 7700
In the demo bot I simply took the wires off the trigger and routed out the back. After closing the case again I used it in that state.
Attachment 7701
The battery could be easily repurposed too, this was used in the demo bot. There is a power connector which you can wire to. Should you wish to use these batteries.
Attachment 7702
This was all done back in November. Now that Evil K'Weevil (EKW) is almost ready, I took the test bot to pieces. Thought I would also look if the motors are any good and understand if they can be reused in a Featherweight.
Continues....