• Rules and Safety

    The FRA publishes a comprehensive set of documents for Roboteers and Event organisers to ensure safe, fair and enjoyable competition for everyone.

    Documents for Roboteers

    Build Rules - The cardinal rules for building Fighting Robots.
    Code of Conduct - The professional standards required by the FRA as a condition of membership.
    Competition Regulations - Rules for running and judging FRA competition.
    EMI Guidelines - Electro-Magnetic Interference in Robots and how to deal with it

    Documents for Event Organisers

    Technical Check Sheet - Technical Safety Checks required for competitors at all events.

  • Facebook

  • Forum Posts


    Drill shaft hub -> HDPE Wheels?

    what do you mean with rounding off?

    basically, the wheels are made like this: drill a 5mm hole into a 10mm thick piece of hdpe.

    Runsler Today, 00:20 Go to last post

    Drill shaft hub -> HDPE Wheels?

    hmm one idea could be to make where the nut/connector goes thicker. i take it you is rounding off ?

    Maxamuslead Yesterday, 08:42 Go to last post

    Drill shaft hub -> HDPE Wheels?

    10mm wheels (theyre kinda big, gabriel inspired, so making them thicker would greatly increase weight), and no common welder (or knowledge how to use

    Runsler Yesterday, 07:44 Go to last post

    Drill shaft hub -> HDPE Wheels?

    On current bot, i am using keyed shaftes and a keyway drill straight into 30mm HDPE wheels. they have worked fine and am yet to see problem.

    Maxamuslead Yesterday, 07:19 Go to last post

    Drill shaft hub -> HDPE Wheels?

    So, i'm searching for a good way to mount HDPE-Wheels to a Drill shaft (Actually, to the Neptune Gearbox from Ranglebox, but the shaft seems to be the

    Runsler Yesterday, 05:46 Go to last post
    Redirect Left

    Featherweight arena

    Cheers for the insight. I'll try to adventure around, if i can find a cheap source of polycarb, used or not, it'd be a great help to projects. Scratched

    Redirect Left Yesterday, 00:03 Go to last post

    Featherweight arena

    Hi Adam, it was a bit of luck to be honest. Clive Brown from Team Toon worked at a company that was located next to the bus stop refurb shop and had obtained

    RogueTwoRobots 19th July 2018, 22:20 Go to last post

    Featherweight arena

    At this moment im finishing the first stage of my FW arena with 3x3m (and expand to 4.5x4.5m after the first event).

    RobotExtreme 19th July 2018, 21:20 Go to last post